© Copyright Trek Bicycle Corporation 2004All rights reservedPart Number 253511BONTRAGER TUBELESS READY TIRE OWNER'S MANUALTable of contentsImport
2Tire and rim compatibilityThe following chart shows which tires are compatible with which rims, and any parts that are needed to make the tires compa
3tire manufacturer t, so some tires are more dif cult to mount than others. Carefully follow the installation instructions, and you should be able
4InstallationRemoving a Bontrager Tubeless Ready or UST tubeless tireIf the tire has sealant installed, be careful not to spill it as you remove the t
5Option 2 – Adding the sealant before the tire is completely mountedWork carefully to avoid spilling any sealant.1. Hold the wheel perpendicular to th
65. Continue mounting the tire- check the location and orientation of the tire beads in the rim (Figure 4). The beads must fit uniformly into the cent
7TroubleshootingCheck the tire pressure on your bike before every ride; all tires lose air pressure due to air leaking through the inner tube or tire
8area around the valve seal or between the tire bead and rim strip. The leaking air can be detected at the spoke holes, but the location of the actual
Kommentare zu diesen Handbüchern